Extended shank hitch

Extended shank hitch DEFAULT

Product Details

FAQs

The pin hole location on different makes of receivers can vary. The two holes in the Tow & Stow shank offer some adaptability. Under normal circumstances, it’s best to have the shank slid as far into the receiver as possible, both from a strength standpoint and because it makes theft of the hitch assembly more difficult, providing a locking pin is used in the receiver and shank.

No. Sway-bar systems, along with weight distribution systems, utilize specialized attachment pieces to connect to the hitch receiver that are not compatible with the Tow & Stow.

With your trailer loaded and hitched up, pull just your vehicle onto a commecial scale, making sure the trailer is not on the scale. Weigh your vehicle with the trailer attached and note that weight.

Next, unhook the trailer and jack up the trailer until there is no trailer weight on the hitch. Make sure the trailer jack is not on the scale. Record that weight of only the truck. This is your Gross Vehicle Weight (GVW).

Now subtract your GVW from the weight with the trailer attached. This will give you your Vertical Tow Weight

For most vehicles, the Model 6 is the appropriate Tow & Stow hitch. However, if you have a vehicle with oversized tires, a lift kit, or a trailer that is not at the same relative height as your receiver, you may need a Model 8 or Model 10. The following diagram depicts how to calculate what is commonly referred to as 'drop.'

Instructional Videos

Documents

Specs

Sours: https://www.bwtrailerhitches.com/product/tow-stow-adjustable-ball-mount

CURT 45795 Hitch Receiver Tube Extender - Shank Size 2 Inches - Extends 14 Inches - GTW 3500 Lbs/TW 350 Lbs

No matter what you are towing, CURT towing equipment is intended to get you from point A to point B and to have peace of mind while doing so. Our hitch extenders are no exception. When you have spacing issues with your hitch-mounted accessories such as a bike rack or cargo carrier, or you need to give your ball mount and trailer coupler a little extra room, a CURT hitch extender can help. Hitch extensions are simply receiver tubes that insert into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back. A hitch extender makes it very easy to give your tow load the room that it requires and helps protect your vehicle from scuffs, scratches and even dents.

This CURT hitch extension is designed to fit a 2 inch x 2 inch receiver tube opening. It extends the receiver by 14 inches and features a gross trailer weight capacity of 3,500 lbs. and a tongue weight rating of 350 lbs. CURT hitch extenders, like our ball mounts, trailer hitches and other made-in-USA quality products, are crafted to be durable and dependable. In addition to the strong steel construction and precise welding, our trailer hitch extenders receive a gloss black powder coat for ongoing prevention of rust, chipping and UV damage.


Product Specifications:

Gross Trailer Weight: 3500 LB
Tongue Weight(TW): 350 LB
Receiver Tube Size: 2 Inches
Length: 14 Inches
Finish: Gloss Black Powder Coat

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Sours: https://www.hannarv.com/P/33176/CURTHitchReceiverTubeExtenderShankSizeInchesExtends14Inc
  1. Super 8 by wyndham montpelier
  2. 3 bedroom houses in maryland
  3. Specialty stocks

The Black Boar Multi-Hitch is an incredibly useful addition to your ATV or UTV. The multi-hitch fits into a 2-inch hitch receiver and features a 2-inch ball and a winch strap loop for use with yard equipment, utility trailers, tow straps and other accessories. The hitch ball is rated for up to 2,000 lb. and has a 2-inch rise to give sufficient ground clearance in most applications. The winch strap loop is rated for up to 5,000 lb. This multi-hitch offers 9-inches of extended length measured from your receiver hitch pin hole. Product includes (1) multi-hitch, (1) 5/8-inch hitch pin and (1) bridge pin. Constructed of durable, powder-coated steel.

  • An Essential ATV/UTV Towing Tool: Easily mounts to your ATV or UTV hitch receiver to provide a hitch ball and winch strap loop for yard work equipment, utility trailers and other towable accessories
  • Includes: (1) multi-hitch, (1) 5/8-inch hitch pin and (1) bridge pin
  • Features: A 2-inch ball, winch strap loop and 2-inch shank; Offers 9-inches of extended length measured from your receiver hitch pin hole
  • Hitch Ball Rating: Up to 2,000 lb.; Winch Strap Loop Rating: Up to 5,000 lb.
  • Durable Construction: Constructed of durable, powder-coated steel
  • Note: For ATV/UTV use only
  • USD $24.06 /EA
    Manufacture Suggested Retail Price: USD $55.49 /EA

Sours: https://www.camco.net/black-boar-atv-utv-extended-ball-mount-2-inch-ball-2-inch-shank-66081
How to extend trailer hitch shank - Saving $300 the hard way? - Part 1

.

Hitch extended shank

.

Hitch Extension

.

Now discussing:

.



439 440 441 442 443