Looking for the perfect true black wood stain color? I sampled four black wood stain colors on five different wood species to compare results and take the guesswork out of your search!
It can be hard to figure out the best black wood stain for your project just by looking at that tiny picture on the can. Stain can appear totally different depending on what type of wood you're using!
When you work for days on your project, the last thing you want to do is mess it up with the wrong color. I've experienced the panic of a finish that looks totally different than the one I pictured in my head, and I try to avoid any surprises with a few test pieces first.
This post contains affiliate links for your convenience. Purchases made through these links may earn me a small commission at no additional cost to you. Please visit my disclosures page for more information.
In my comparison of six grey wood stain colors, the hue changed considerably depending on what species of wood was used. Some skewed more towards blue, while others looked more green, depending on the undertones.
Turns out, it's hard to transform any warm wood color into a cool color! Even my favorite grey wood stain only looks truly grey in light tones like maple. I wanted to see if the same effect occurred with black wood stain.
Why choose black wood stain over paint?
- Black stain allows the natural wood grain to show through.
- Black stain soaks into the wood rather than sitting on the surface like paint, which means it:
- Holds its color even when scratched, and
- Doesn't become thick and heavy with multiple coats.
- Black paint, especially with a higher gloss sheen, can look plastic and artificial.
- Black paint usually requires two or more coats to get full coverage, with hours of drying time in between each coat.
- Depending on the protective top coat you're using, you could finish your staining project in a day!
- Brush strokes and drips are less apparent with stain versus paint.
Black wood stains to be tested
For this test, I'm comparing Minwax True Black, Varathane Classic Black, General Finishes Black Gel Stain and Speedball Super Black India ink. The last one isn't exactly a wood stain, but I tried it out on my DIY rustic end table legs and it worked great!
I avoided any stain color called Ebony, which could contain hints of dark brown that would skew the results. Some brands have more than one formulation with the same color, so I chose the most commonly used version from each brand.
All the black wood stain colors were tested on birch plywood, maple, poplar, pine, and red oak. Each type came from the same board to avoid any differences in color. They were sanded up to 150 grit sandpaper, and were not treated with any kind of wood conditioner before applying the stain.
The first coat of stain was allowed to soak in for exactly two minutes, then the excess was wiped off with a shop paper towel. The first coat was allowed to dry for two hours before applying a second coat. The second coat followed the same staining and drying procedure.
A strip of painter's tape was applied after the first coat dried, to separate the first and second coat on the sample. The tape was peeled off the next day before the top coat was applied.
The clear protective top coat was applied the next morning, and dried for another two hours. I used Minwax Polycrylic with a satin finish for the top coat on all the samples, because it dries clear and won't affect the final color.
Each sample has been photographed in the same lighting conditions and camera settings against a white background without any color correction other than adjusting the white balance to the white paper.
Let's see how these samples turned out!
Minwax True Black
Overall, the Minwax True Black wood stain performed really well! You could probably get away with just one coat with most types of wood. A second coat seemed to make the stain slightly darker and more uniform, but it wasn't a dramatic difference. The top coat deepened the black color without obscuring the wood grain.
The only loser in this group was the red oak sample, which turned out really blotchy and somehow lost most of its stain when top coat was applied.
A lot of the stain was pulled up when the painter's tape was removed between the first and second coat. You can see that it only pulled up the stain on the prominent grain lines, which indicates that it didn't soak in as deep in those areas.
Varathane Classic Black
Varathane Classic Black had similar results to the Minwax samples, so you could go with either when deciding which to buy at the store. Again, there wasn't too much of a difference between the first and second coats, so you'll save time by just applying one coat.
Overall, this was the lightest of the black wood stains, especially on the birch plywood and maple. If you're looking for a dark charcoal gray color, this might be just what you're looking for! But if you're going for true black, there are others that performed better.
The red oak did something weird again with the top coat! You'll see later on that the Polycrylic did well on red oak with the other two brands, so maybe it has to do with how deep the stain soaks into the hard wood.
General Finishes Black Gel
One of the benefits of gel stain is that it's really easy to work with, and the General Finishes black gel stain was no exception. It's easy to apply without drips, then wipes off easily. There isn't a noticeable strip of missing stain from the painter's tape, which tells me that the stain soaks deep into the wood and bonds to the fibers well.
I actually had to go back to my samples to double check that I had the positioning right in the photos, because somehow one coat of stain is darker than two! My theory is that the gel bonds to the stain that's on the surface of the wood from the previous coat, and pulls it away when the excess is wiped off.
Speedball India Ink
India ink had the most consistent color over all the different wood species. It produced the blackest black, no matter what the underlying wood is. Two coats made a little bit of a difference, and helps to ensure that you get the same color throughout the board.
It also passed the painter's tape test. There's a crisp line between the two coats, and nothing pulled off when the tape was removed. This particular India ink is waterproof, so you might be able to get away without a top coat if it's a piece that won't get any wear and tear.
India Ink was the messiest to work with (probably because it's meant for calligraphy, not wood stain!) It dried really fast, so it's harder to wipe off the excess. You can see on the poplar and maple samples that there was a little too much on the second coat that couldn't be removed, which resulted in a shiny spot.
Black stain comparison by wood species
I always find it helpful to compare the different stains on a single wood species right next to each other, to see how they change with each brand. Hopefully this will help you make a decision!
Black wood stain samples on pine
On pine, Varathane Classic Black had the most contrast and distinct grain lines. India Ink was definitely the blackest black, with just a hint of grain pattern. Minwax True Black is a happy medium between visible grain pattern and black color.
Black wood stain samples on birch plywood
Birch plywood is notorious for a blotchy stain finish, but these samples all seem to have pretty even coverage. India ink and Minwax are both so dark, you can barely see the grain at all. Varathane and General Finishes both show a nice grain pattern without too much contrast.
Black wood stain samples on poplar
I was really surprised by how dark and even all the poplar wood samples turned out! I love poplar for painted furniture builds, since it has tight grain that takes paint well. Apparently the same applies to black wood stain! You really can't go wrong with any of these colors.
Black wood stain samples on maple
Honestly, I don't think I would ever choose to stain maple black! General Finishes gray gel stain on maple is one of my favorite combos, and I'm surprised at how disappointing the black version turned out. If I had to choose, I think I'd pick the Varathane stain because it allows some of the grain to show through with even coverage throughout.
Black wood stain samples on red oak
Red oak is a tricky wood to stain, especially black! The India ink was the only good result in this bunch. If you're thinking of staining your oak kitchen cabinets, that's the one I'd choose!
So, which one is your favorite? I'd love to hear your opinion down in the comments below! Hopefully this helps you make a decision on which black wood stain to choose for your next project!
Stains Color Guide
The colors shown are for reference purposes only. They have been reproduced using digital production techniques. Always test stain on a hidden area of the wood to verify desired color.
Minwax® Wood Finish Oil-Based Penetrating Stain
Minwax® Wood Finish Water-Based Penetrating Stain Semi-Transparent and Solid
Minwax® Gel Stain
Minwax® Design Series
Minwax® Water Based Express Color™
Minwax® Wood Finishing Cloths
Get Tips on Choosing a Stain Color
PolyShades® Color Transformation Guide
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood.
Learn How To Transform
Considering adding a black stain to your wood project? Check out Minwax True Black stain – our full review & how it looks on 7 types of wood!
Black stained wood is really cool because, at first glance, it sometimes doesn’t even look like wood.
We first discovered this when we built this wooden desk for Sean’s mom and her inspiration had black metal legs. Black wood stain quickly transformed basic wood for an at-a-glance metal look.
I was really excited to test out my favorite 3 black wood stain colors on seven types of wood so you can see exactly how they each look!
Minwax True Black
Minwax is a brand commonly carried at the Lowes. So, if you shop there, this will be your black wood stain option.
Click here to buy Minwax True Black at Lowes.
True Black is a seriously BLACK wood stain. It has pretty much 100% coverage and allows none of the natural wood to shine through.
Why not just paint it black then?
Wood stain soaks into the wood and will not scratch or peel off like paint that just sits on the surface.
Plus, even though this stain is completely opaque, it lets the texture of the wood grain show through.
Here is how True Black looked on each of seven wood types!
How does Minwax True Black look on oak?
Oak is a really beautiful hardwood with natural red undertones. I honestly would never stain oak black because it’s expensive and beautiful but this scrap was fun to play with!
Tru black gives 100% coverage on oak. It’s black all over, but even darker black on the grain.
I actually love how this looks with the matte black-on-black tones. It’s shockingly gorgeous!
How does Minwax True Black look on pine?
Pine wood has natural yellow tones with some slightly darker graining.
True Black gives about 95% coverage on pine. I see a tiny bit of lightness around the grain but not much.
True Black doesn’t really do much for pine, but if you just want it to look basically solid black, this is a good option.
How does Minwax True Black look on poplar?
Poplar has natural green undertones and True Black completely covers that up.
It gives pretty close to 100% coverage and makes it all look basically solid black.
This combo doesn’t do anything for me and I think it’s too much coverage, but if you want solid black without painting, this is a good option.
How does Minwax True Black look on white wood?
Whitewood is very light with medium-dark brown knots. It’s a cheap wood and therefore fine in my book to stain dark.
I really like how True Black looks on white wood. It gives about 98% coverage a very solid black but the grain lines pop at an almost charcoal gray color that I find really pretty!
How does Minwax True Black look on birch plywood?
Birch is naturally very light with golden tan wavy grain lines.
True Black has 100% coverage with one coat on birch. You can see the grain at an angle, and it reads as a dark charcoal color.
If you want solid black, this is a good option, but I don’t love how it really hides the beautiful graining.
How does Minwax True Black look on cypress?
Cypress has naturally red undertones and took True Black at about 95% coverage. There is a slight amount of lightness around some of the grain.
I think cypress has really beautiful natural grain, so I would not personally cover it with something as opaque as True Black.
How does Minwax True Black look on a 2×4?
2x4s are light wood with dark knots.
True Black gives nearly 100% coverage and does a pretty great job of hiding the knots, too.
If you want to jazz up a 2×4, I think that True Black is a great option!
Be sure to check out my other DIY wood stain ideas!
Facebook | Instagram | Pinterest | Twitter | YouTube
Sharing is caring!
Black wood stain minwax
.Staining wood using Minwax Wood Finish Ebony 2718
- The veggietales show
- Short ombre nails
- Arch frame mirror
- Cisco ospf commands
- Identification waterford crystal acid marks
- Stingray episodes
- Power trains walmart
- Flagstaff bike park
- Fryer milling machines