2014 f150 headlight removal

2014 f150 headlight removal DEFAULT

Included for free with this service

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Ford F-150 Headlight Bulb Replacement is $109 with $14 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Ford F-150V8-5.4L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$142.65Shop/Dealer Price$159.57 - $187.81
2017 Ford F-150V6-2.7L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$2844.99Shop/Dealer Price$3542.51 - $5612.52
2016 Ford F-150V6-2.7L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$154.91Shop/Dealer Price$179.91 - $232.36
1989 Ford F-150V8-5.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$122.97Shop/Dealer Price$139.96 - $168.44
1977 Ford F-150V8-6.6LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$154.39Shop/Dealer Price$179.27 - $231.35
1996 Ford F-150V8-5.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$122.65Shop/Dealer Price$139.58 - $167.84
1977 Ford F-150V8-5.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$142.39Shop/Dealer Price$162.87 - $202.08
2015 Ford F-150V6-2.7L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$159.91Shop/Dealer Price$185.14 - $237.78

Show example Ford F-150 Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Recent articles & questions

The Traveler’s Guide to Driving in Belgium

Belgium Belgium is a beautiful, historic city that has a lot to offer those who vacation there. You may want to spend some time exploring Brussels and visiting places (https://www.tripadvisor.com/Attractions-g188634-Activities-Belgium.html) such as the Grand Palace. You may also want to...

What is a Compression Test?

A compression test will reveal the state of your engine’s parts, and can potentially save you money on buying a replacement engine.

Changing spark plug or ignition coils

Changing spark plugs at 46000 isn't necessarily a bad idea, but mostly I say that because it will keep them from seizing to the cylinder head. Most late model cars like yours can run a set of plugs for longer...

Want to know what this check engine code 190302 mean

This code relates to a fuel tank ventilation/purge system leak. Three years ago, BMW issued a Technical Service Bulletin - TSB (https://static.nhtsa.gov/odi/tsbs/2014/SB-10057341-3735.pdf) that documents a common cause of the code, namely a defective pressure switch. While other faults can cause...

I have a question about an electrical issue with my 2017 Nissan Altima sr 2.5L auto trans (midnight package)

Sours: https://www.yourmechanic.com/estimates/ford/f-150/headlight-bulb-replacement

Headlight Change 2009-2014 Ford F-150

1. Getting Started - Prepare for the repair

Learn More >

2. Open the Hood - How to pop the hood and prop it open

3. Remove Bulb - Steps to remove a burnt out bulb

4. Helpful Hints - How to find replacement bulb type and other hints

What would you like your bulbs to do? See ClearerUpgrade To LEDHID Style

Consider a premium bulb like the Silverstar Ultra with a specially designed filament, proprietary gas mixture and lamp coating for the best downroad lighting. Learn more about Silverstar Ultra.

Upgrade your fog lights to LED with a direct install option that will connect easily to your car’s existing bulb housing. Sylvania has an option with aviation grade aluminum body and a turbo cooled fan. Check out Sylvania LEDs.

Consider a bulb like the zXe with a proprietary Xenon gas mixture to match the white light of HID lights for the brightest headlight and added clarity. More information on zXe bulbs.

5. Replace Bulb - Procedures to replace the new bulb

6. More Info. - Additional information on headlights

Share on   Share on Twitter  Share on Facebook

The video above shows you to replace the headlight in your 2013 Ford F-150. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your F-150 at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Fords, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Fords have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your F-150 has this type of bulb, we do not recommend that you attempt to change it yourself.

When you change the headlight on your F-150, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
Sours: https://www.carcarekiosk.com/video/2013_Ford_F-150_XLT_3.7L_V6_FlexFuel_Standard_Cab_Pickup/lights/headlight
  1. Wholesale electronic cigarettes suppliers
  2. Medial canal fibrosis
  3. Fabfitfun annual
  4. Siddharth movie tamil
  5. Honey badger vector

Ford F-150 Headlight Bulbs Replacement Guide
How to change a low / high beam, turn signal or front side marker bulb in the headlights of a 2009-2014 Ford F150.

2013 F150 Headlight
Open Hood
Remove Plastic Screw
This automotive "how-to" guide was specifically written to assist owners of the 12th generation (2009, 2010, 2011, 2012, 2013 & 2014) Ford F-150 truck in changing a burnt out combination low & high beam bulb, front turn signal bulb or front side marker bulb in the headlight assemblies.

Owners of other F-Series trucks or other Ford, Lincoln and Mercury vehicles such as the Super Duty F-250, F-350, F-450, Expedition, Explorer, Edge, Escape, E-150, E-250, E-350, Transit Connect, Flex, MKX, MKT, Navigator and Mountaineer may also find these DIY instructions to be helpful.

Replacement headlight bulbs with their part numbers are as follows: Low & High Beam # H13 (9008), Front Turn Signal # 3157A or 3157NA, and Front Side Marker # 168.

The tools needed to change the headlight bulbs are a Phillips head screwdriver, and a 10mm socket with ratcheting wrench.

Phillips Screw Removed
Pull Out Plastic Fastener
Remove 10mm Bolts
The first two steps are to open the hood and move to the side of the truck with the burnt out headlight bulb.

Then locate the small black plastic Phillips head screw at the top of the rubber flap which covers the front inner edge of the headlight assembly.

Remove the plastic screw by turning it counter clockwise with a Phillips head screwdriver and pull it straight out.

Pull the rubber cover away from the headlight assembly.

1st 10mm Bolt Removed
Loosen 2nd Top 10mm Bolt
2nd Bolt Removed
Remove the two black metal bolts on the top of the headlight assembly by turning them counter clockwise with a 10mm socket and ratcheting wrench.Ford-F-150-Headlight-Bulbs-Replacement-Guide-010
3rd Bolt On Inner Front
3rd 10mm Bolt Removed
Pull Off Headlight Housing
The 3rd and final bolt holding the headlight housing in place is mounted horizontally on the front inner edge.

Remove the 3rd bolt with the 10mm socket and ratcheting wrench. Set the three 10mm bolts and the black plastic screw aside in a safe place.

Friction Fasteners Removed
3 Metal Bolts, 1 Plastic Screw
Turn Over Headlight
Gently pull the headlight assembly straight off the front of the truck. The headlight is also held in place by two pegs and two friction fasteners on the outer edge.

If you have trouble removing the headlight, try wiggling it back and forth while pulling on it.

Turn the headlight housing over and rest it on the front bumper. To avoid scratching the bumper or the plastic headlight lens, place a towel in between the two surfaces.

Release Power Connector
1/4 Turn Counter Clockwise
Pull Out Old Headlight Bulb
The dual filament low & high beam bulb is the largest socket located at the center of the headlight housing.

Press the release button on the light grey power connector and slide it straight off the base of the headlight bulb.

Rotate the base of the low/high beam bulb 1/4 turn counter clockwise and pull it straight out of the headlight housing.


Sylvania H13 12V 60/55W
Insert New Low/High Bulb
1/4 Turn Clockwise
Insert a new # H13or "9008" low/high beam headlight bulb straight in to the housing and rotate it 1/4 turn to lock it in place.Ford-F-150-Headlight-Bulbs-Replacement-Guide-022
Low/High Beam Bulb Installed
Push On Power Connector
Turn Signal Bulb Socket
Push the light grey power connector straight on to the base of the headlight bulb until it clicks in to place.Ford-F-150-Headlight-Bulbs-Replacement-Guide-025
1/4 Turn Counter Clockwise
Remove Socket
Pull Old Bulb Straight Out
The front turn signal bulb is located inside the light orange socket at the bottom of the headlight housing.

Rotate the socket 1/4 turn counter clockwise and pull it straight out of the housing. Pull the old turn signal bulb straight out of the socket and push in a new amber colored # 3157NA, 3157Aor 3157NAK.

Turn Signal # 3157NAK
Push In New 3157A Bulb
Re-Insert Socket
Re-insert the turn signal bulb socket back in to the headlight housing and rotate it 1/4 turn clockwise to lock it in place.Ford-F-150-Headlight-Bulbs-Replacement-Guide-031
1/4 Turn Clockwise
Front Sidemarker Bulb
1/4 Turn Counter Clockwise
The small light grey socket for the front sidemarker bulb is located at the outer edge of the headlight housing.Ford-F-150-Headlight-Bulbs-Replacement-Guide-034
Remove Side Marker Socket
Pull Out Side Marker Bulb
Push In New # 168 Bulb
Rotate the socket 1/4 turn counter clockwise and pull it straight out of the headlight assembly.

Pull the old side marker bulb straight out of the socket and push in a new # 168bulb.

If necessary, you can also use any other miniature wedge base bulbs such as the number 158, W5W, 2825, 194 or a compatible LED unit.

Re-insert the socket back in to the housing and rotate it 1/4 turn clockwise to secure it in place.

1/4 Turn Clockwise
Line Up Side Fasteners
Push On Headlight Assembly
To re-install the headlight housing, line up the two black plastic pegs and two silver metal friction fasteners on the outer edge with their corresponding holes on the corner of the truck.

Gently push the headlight assembly back in to place.

Replace 10mm Top Bolts
2nd Top 10mm Bolt
Replace 3rd Bolt Inner Edge
Thread in the two 10mm bolts on the top of the headlight housing and the one on the front inner edge by hand a few turns to prevent them from becoming cross threaded.Ford-F-150-Headlight-Bulbs-Replacement-Guide-043
Tighten With 10mm Socket
Replace Rubber Flap
Tighten the three headlight bolts with the 10mm socket and ratcheting wrench by turning them clockwise. Ford-F-150-Headlight-Bulbs-Replacement-Guide-046
Push In Plastic Screw
Headlight Housing Replaced
Test New Light Bulbs
Replace the rubber flap over the inner edge of the headlight housing and insert the black plastic fastener in to the corresponding hole. Push the black plastic screw in to the center of the fastener to secure it in place.

Test the new bulbs by turning on the headlights, flashing the high beams and activating the hazard signals.

For more, check out my other Ford F-150 Repair & Maintenance Guides.

Sours: https://paulstravelpictures.com/Ford-F150-Headlight-Bulbs-Replacement-Guide/index.html
2013-2014 F150 Diode Dynamics Replacement OEM HID Bulbs Install


F150 headlight removal 2014


LASFit LED Headlight Bulb Install! 09-14 F150


You will also be interested:


168 169 170 171 172